6 AND 13 MM TAPPING MACHINE
We offer HMP Make Tapping Machine that is widely used for their high load bearing capacity. Materials are obtained from trusted vendors, and these machines are constructed and are resistant to wear and tear and corrosion and have longer service life. Easy to install, these machines are available in different models and specifications to meet the variegated application needs of clients. Out of various special purpose machine tools, drilling and tapping machines are very much used in automotive industry – Also Drilling & Tapping Machine can be designed and developed as per customer requirement
Features & Applications
Machine’s Clutch Cone: Export quality liner clutch system make with use of specially processor trimonthly the clutch the liner clutch.
HEAD: Made from close grained cast iron accurately bored, rime ring and honed in perfect paralyze between the column and spindle. Easy clamping device fitted for locking it on the column.
SPINDLE: Made from EN8 to withstand distortion it is lanced and mounted on roller bearings.
TABLE: Proportionately designed for rigidity and sufficient surface area is provided to hole down job. It can be vertically powered or can be vertically powered or raised by worm and rack raised by worm rack (19mm). The slotting is provided to hold the heavy job.
BASE: This is of design and provides sufficient area for heavy jobs. Slots are provided for convenient holding.
Fabrication
Glass Industry
Plastic Industry
Small Workshop
Repairing Works
Ceramic industry
Construction Sites
Small Workshop
College Workshops
Automobile industry
Sheet Metal Industry
Wood Working Industry
Every Small, Medium And Large Scale machining Industry
Std. Accessory:
- Motor Pulley, Manual book
Extra Accessory:
- Drill Chuck with key & arbour, Electric Motor, V Belt, Reversible Switch, Drill Vice, Coolant Pump with Fitting, Special T-bolts, Wooden Box Packing & Forwarding.
Specifications
| Specifications | 6 MM TAPPING MACHINE | 13 MM TAPPING MACHINE |
|---|---|---|
| Tapping Machine Capacity | 6 mm | 12 mm |
| Drilling Capacity | NA | NA |
| Spindle Travel/Table travel | 60 mm | 75 mm |
| Distance Spindle to Column | 80 mm | 140 mm |
| Distance between chuck to base | 225 mm | 450 mm |
| Distance between chuck to work table | 225 mm | 380 mm |
| Size of base Plate-L x B | 390 x 245 mm | 480 x 350 mm |
| Size of Work Table-L x B | 150 x 150 mm | 190 x 220 mm |
| Diameter of Column | 41 mm | 74 mm |
| V-Belt (Inside) | inside A-39 | inside A-71 |
| V-Belt for Motor (Outside) | A-39 | A-25 |
| No. of Spindle Speeds | 3 Speed | 3 Speed |
| Forwards Speeds Range | 630 TO 1480 | 350/620/1100 |
| Reverse Speeds Range | 630 TO 1480 | 420/745/1315 |
| Motor Single phase or three phase | 0.5 H.P. | 0.75/1 H.P. |
| RPM | 1440 R.P.M. | 1440 R.P.M. |
| Overall Height | 735 mm | 1245 mm |
| Overall Width | 250 mm | 370 mm |
| Overall front to back | 400 mm | 600 mm |
| Weight approx. | 40 Kg. | 120 Kg. |
